CAREAIR: A Computer Aided Modeling Toolbox to Generate and Analyze Emission Data in High Temporal and Spatial Resolution

ABSTRACT

For the evaluation of air quality improvement strategies, emission data in high temporal and spatial resolution is necessary, including all emission sources and all relevant pollutant species. Computer aided models are usually used to generate this emission data because it is not possible to obtain measurements from all sources, and, furthermore, a large amount of data has to be handled. For the development of emission modeling systems, a software tool called CAREAIR has been created. The intention of this paper is to introduce CAREAIR to the international community dealing with emission inventories and air quality improvement strategies.

CAREAIR is not just a single emission model but a flexible modeling toolbox. The database contains data and formulas for data manipulation, which is performed by using a set of flexible operators with different specifications. The emission calculation is carried out by combining several data manipulation operators. The CAREAIR modeling toolbox allows model implementation for the calculation of emissions from different pollutants in a high spatial and temporal resolution. The application of CAREAIR within various investigation projects in Germany, Europe, and Nigeria shows that CAREAIR is an appropriate instrument for the development of flexible emission models by meeting the various demands of these projects. The function and the data structures of this modeling toolbox are described and, towards the end of the paper, an example of an emission calculation with CAREAIR is given.     

The dioxin/POPs legacy of pesticide production in Hamburg: Part 2—waste deposits and remediation of Georgswerder landfill

α-HCH, β-HCH, and γ-HCH (lindane) were listed as persistent organic pollutants in the Stockholm Convention. Therefore, they need to be globally addressed including the wastes remaining from historic use and production. While at most lindane production sites the unintentionally produced 85 % HCH waste isomers have been deposited, at a former pesticide factory in Hamburg-Moorfleet HCH waste isomers have been recycled from 1953 to 1984 by thermal decomposition to chlorobenzenes and resulted in high polychlorinated dibenzo-p-dioxin/polychlorinated dibenzofuran (PCDD/PCDF)-contaminated residues. The management of the PCDD/PCDF-contaminated waste from the former pesticide factory in Hamburg has been assessed and quantified. Based on past accredited PCDD/PCDF measurements, the registered 3,700 tonnes of disposed thermal HCH decomposition residue contained 333 to 854 kg of PCDD/PCDF toxicity equivalent (I-TEQ) in 53–102 tonnes total sum of PCDD/PCDF. The wastes have been deposited together with other wastes in landfills in Hamburg and other parts of Germany. For the Georgswerder landfill (Hamburg), where approximately 50 % of the PCDD/PCDF is disposed, current and previous situation and remediation activities are described. While PCDD/PCDF leaching from the landfill is controlled and incinerated, more water soluble organochlorines (vinyl chloride, cis-1,2-dichlorethene, chlorobenzenes) and benzene remain as a challenge for groundwater management. A comprehensive aftercare program has been established and will need to be operated by future generations including renewal of containment systems. Former lindane/HCH productions need—in addition to HCH deposits—to be assessed for possible recycling practice of HCH and related PCDD/PCDF-containing deposits. This could systematically be addressed within the Stockholm Convention implementation.     

Effects of elevated pO3 on carbon cycle between above and belowground organs of trees

Translocation of carbohydrate from leaves to roots via phloem and reallocation from roots to leaves via xylem regulate the allocation of carbon （C） between above and belowground organs of trees. To quantitatively analyze effects of elevated ozone concentrations pO3 on the internal cycle of C, juvenile beech and spruce were grown in phytotrons and exposed to ambient and elevated pO3 （i.e. twice-ambient O3 levels, restricted to 〈 150 ppb） for two growing seasons. The translocation of C in the phloem and xylem was quantitatively studied by investigating the phloem/xylem-loading of sugars, the differentiation of stem conductive tissue and the hourly water flow through the stem. Results in the present study shown, elevated pO3 significantly decreased C translocation from shoot to roots in beech by reducing both sugar concentration in the phloem and conductive phloem area. Elevated pO3 also significantly decreased C reallocation from the roots to the shoot in beech by reducing both of sugar concentration in the xylem and transpiration rate. The adverse effects of elevated pO3 on C translocation in the phloem and xylem, however, were small in spruce. Contrasting to beech, spruce is less sensitive to elevated pO3, regarding to phloem differentiation and sugar concentrations in the phloem and xylem.     

Effect of different types of elemental sulfur on bioleaching of heavy metals from contaminated sediments

The application of two different types of elemental sulfur (S0) was studied to evaluate the efficiency on bioleaching of heavy metals from contaminated sediments. Bioleaching tests were performed in suspension and in the solid-bed with a heavy metal contaminated sediment using commercial sulfur powder (technical sulfur) or a microbially produced sulfur waste (biological sulfur) as substrate for the indigenous sulfur-oxidizing bacteria and thus as acid source. Generally, using biological sulfur during suspension leaching yielded in considerably better results than technical sulfur. The equilibrium in acidification, sulfur oxidation and metal solubilization was reached already after 10-14 d of leaching depending upon the amount of sulfur added. The metal removal after 28 d of leaching was higher when biological sulfur was used. The biological sulfur added was oxidized with high rate, and no residual S0 was detectable in the sediment samples after leaching. The observed effects are attributable to the hydrophilic properties of the biologically produced sulfur particles resulting in an increased bioavailability for the Acidithiobacilli. In column experiments only poor effects on the kinetics of the leaching parameters were observed replacing technical sulfur by biological sulfur, and the overall metal removal was almost the same for both types of S0. Therefore, under the conditions of solid-bed leaching the rate of sulfur oxidation and metal solubilization is more strongly affected by transport phenomena than by microbial conversion processes attributed to different physicochemical properties of the sulfur sources. The results indicate that the application of biological sulfur provides a suitable means for improving the efficiency of suspension leaching treatments by shortening the leaching time. Solid-bed leaching treatments may benefit from the reuse of biological sulfur by reducing the costs for material and operating.     

Impact of short-term and long-term elevated CO2 on emission of carbonyls from adult Quercus petraea and Carpinus betulus trees

The study aimed to elucidate the effect of elevated CO2 in short- and long-term experiments on the emission potential of carbonyls from mature oak (Quercus petraea) and hornbeam (Carpinus betulus). The trees were investigated using a canopy crane established in a mixed forest in Switzerland. Short-term CO2 experiments were performed on single leaves with a gas exchange measuring unit by increasing CO2 in the enclosure before and during the measurements. Long-term CO2 fumigation was performed for one vegetation period by a webFACE design. Short-term as well as long-term exposure of leaves resulted in no significant changes in carbonyl exchange in neither Q. petraea nor C. betulus. Carbonyl emission was not affected by stomatal closure under elevated CO2 levels. In contrast to the emission of isoprenoids from vegetation which is thought to be reduced at elevated atmospheric CO2, the exchange of carbonyls seems to be generally unaffected under these conditions.     

Biodegradation and speciation of residual SS-ethylenediaminedisuccinic acid (EDDS) in soil solution left after soil washing

This paper aims to investigate the degradation and speciation of EDDS-complexes (SS-ethylenediaminedisuccinic acid) in soil following soil washing. The changes in soil solution metal and EDDS concentrations were investigated for three polluted soils. EDDS was degraded after a lag phase of 7-11 days with a half-life of 4.18-5.60 days. No influence of EDDS-speciation on the reaction was observed. The decrease in EDDS resulted in a corresponding decrease in solubilized metals. Changes in EDDS speciation can be related to (1) initial composition of the soil, (2) temporarily anoxic conditions in the soil slurry after soil washing, (3) exchange of EDDS complexes with Cu even in soils without elevated Cu and (4) formation of NiEDDS. Dissolved organic matter is important for metal speciation at low EDDS concentrations. Our results show that even in polluted soils EDDS is degraded from a level of several hundred micromoles to below 1 microM within 50 days.     

Safety Evaluation for a Biodiesel Process Using Prion-Contaminated Animal Fat as a Source (6 pp)

Background Due to the bovine spongiform encephalopathy (BSE), specified risk material (SRM) as well as animal meat and bone meal (MBM) are banned from the food and feed chain because of a possible infection with pathogenic prions (PrPSc). Nowadays, prions are widely accepted to be responsible for TSE(transmissible spongiform encephalopathies)-caused illnesses like BSE and scrapie, and especially for the occurrence of the new variant of CJD in humans. Presently, SRM and MBM are burnt under high temperatures to avoid any hazards for humans, animals or the environment. The aim of this study was to evaluate a method using animal fat separated from Category I material which includes SRM and the carcasses of TSE-infected animals, or animals suspected of being infected with TSE, as a source for producing biodiesel by transesterification, analogous to the biodiesel process using vegetable oil. Methods For this purpose, animal fat was spiked with scrapie-infected hamster brain equivalents – as representative for a TSE-infected animal – and the biodiesel manufacturing process was downscaled and performed under lab-scale conditions. Results and Discussion The results analysed by Western blotting showed clearly that almost each single step of the process leads to a significant reduction of the concentration of the pathogenic prion protein (PrPSc) in the main and side-products. Conclusion The data revealed that the biodiesel production, even from material with a high concentration of pathogenic prions, can be considered as safe. Recommendations and Outlook The obtained results indicated that biodiesel produced from prion-contaminated fat was safe under the tested process conditions. However, it has to be pointed out that the results cannot be generalized because a different process control using other conditions may lead to different results and then has to be analysed independently. It is clear that the production of biodiesel from high risk material represents a more economic usage than the combustion of such material.     

Fourth WHO-coordinated survey of human milk for persistent organic pollutants (POPs): Belgian results

Persistent organic pollutants (POPs) are chemicals that accumulate in the food chain and are toxic to humans and wildlife. The fourth World Health Organization (WHO) survey on POP levels in human milk (2006-2009) aims to provide baseline and trend information on human exposure to POPs. So far Belgium participated in all three previous rounds (1988, 1992, 2001). Whereas the first three rounds focused on determination of dioxins and PCBs in pooled (mixed) samples, the fourth survey comprised the analyses of individual milk samples for nine "basic POPs" (chlorinated pesticides and indicator PCBs) and of pooled milk samples for "basic POPs", "advanced POPs" (dioxins and dioxin-like PCBs) and "optional POPs" (polybrominated diphenylethers [PBDEs], polybrominated dioxins and dibenzofurans [PBrDD/F], mixed halogenated dioxins and dibenzofurans [PXDD/F] and hexabromocyclododecane [HBCD]). For the Belgian participation human milk samples were collected during the summer of 2006 from 197 women between 18 and 30 years old distributed over all Belgian provinces. The individual samples were analyzed in a Belgian Laboratory for "basic" POPs. A pooled sample was made from 178 individual samples and analyzed by the WHO Reference Laboratory for the "basic, advanced and optional" POPs. The results indicate that most organochlorinated pesticides banned 25-30 years ago were below or around detection limits in Belgian human milk samples although DDE was still found at low levels in all samples. Over the last five years the levels of marker PCBs and PCDD/Fs in Belgian human milk decreased, respectively, by 58% and 39%. For some of the other emerging or older compounds recent international data are needed to allow comparison. This shows the importance of international studies as run by WHO.     

Emissions of isoprene,monoterpene and short-chained carbonyl compounds from Eucalyptus spp. in southern Australia

Eucalypts are among the highest emitters of biogenic volatile organic compounds, yet there is relatively little data available from field studies of this genus. Emissions of isoprene, monoterpenes and the short-chained carbonyls formaldehyde, acetaldehyde and acetone were determined from four species (Eucalyptus camaldulensis, Eucalyptus globulus, Eucalyptus grandis, and Eucalytpus viminalis) in Australia. A smaller comparative study was conducted on E. camaldulensis in south-eastern Australia. Carbonyl emissions, reported here for the first time from eucalypts, were generally comparable with rates reported for other species, with diurnal emissions peaking at about 4, 75 and 34 nmol m^?2 min^?1 for acetone, formaldehyde and acetaldehyde respectively. There was wide variation in diurnal isoprene and monoterpene emissions between species, but under standard conditions, isoprene emissions were much lower than previous reports. Conversely, standard emission rates of monoterpenes were as much as six times greater than previous reports for some species. Emission of each carbonyl was correlated with its ambient concentration across different species, but more weakly related to temperature. Acetaldehyde emission in particular was significantly correlated with transpiration, but not with sap flow or with ethanol concentrations in xylem sap, suggesting fermentation within the leaf and stomatal conductance are primary controlling processes. Differences in acetaldehyde exchange velocities between sites, in addition to transpiration differences, suggest stomata may indeed exert long term emission regulation, in contrast to compounds for which no biological sink exists.     

Chemische Reaktionen von Chlorvinylarsinverbindungen (Lewisite)

2-Chlorovinylarsine dichloride (Lewisite I) react by room temperature quickly with alcohols in an equilibrium reaction to yield 2-Chlorovinylarsine chloride ether and 2-Chlorovinylarsine bisether. The reactions are not quantitative. The ethyl- and propylether are not stable. The ether were identified with mass spectrometry.